Painted walls are in demand all over the world. They have long supplanted many types of finishes. This is easy to see, just read the most popular magazines on interior design. However, such an operation requires very careful preparation of the surface, which should be perfectly smooth, otherwise the slightest flaws will be visible. For most ordinary residents who are used to doing all the repair work on their own, to perform such actions will be very problematic. But do not be upset, you can solve the problem by painting the wallpaper. Manufacturers produce several special models: vinyl, non-woven, glass. They will help transform the living space, arrange it in accordance with the requirements.
Wallpaper for painting are special models characterized by the absence of a pattern and the presence of relief. Popular material is more expensive than conventional analogues, but has a long service life. This is ideal for fans of changing the environment, just repaint the surface in a different tone. Manufacturers produce mainly white, and only in rare cases, color specimens are found.
When painting wallpaper, you must follow the rules that allow you to achieve the best results. Paint can only be applied on a dry cloth, so after gluing it is necessary to wait a certain period, usually 2 days is enough. Before starting work, it is required to protect the floor, ceiling, windows from accidental ingress of coloring matter. For these purposes, polyethylene is suitable, the joints are closed with masking tape.
Paint is selected depending on the type of wallpaper chosen. For non-woven models, it is recommended to use latex-based products; for vinyl, an emulsion of water is suitable; cullet can be painted with acrylic and latex coloring compounds. Before applying, you should read the instructions that came with the purchase. Some species must be bred, other compounds are used without preparation.
Paint is usually applied in two layers. The first is the primer, the second is the finish.An interval of 12 hours should be maintained between them. During this time, the first layer will completely dry. So that after painting no transitions are visible, the surface must be painted in one pass. For hard to reach places, small rollers and brushes are used.
After drying of the main coating, the surface can be decorated with various ornaments, images, then coated with colorless varnish. The process of applying this layer is similar to the previous one, also occurs in two stages. For work, you can use glossy or matte options. This coating is easily cleaned from contamination.
Advantages and disadvantages of painting
The method of decorating walls using wallpaper for painting is popular. Despite the higher cost compared to standard models, this option is chosen for many reasons, taking into account all the positive characteristics:
Surface preparation. Unlike conventional painting, wallpaper gluing does not require a perfectly flat surface, which is difficult to obtain.
Crack protection. Wallpaper protects the walls from cracks, especially cullet, which can withstand tensile loads of up to 3 tons per m².
Appearance. Due to the wide range of coloring compositions, the presence of relief, the possibility of applying ornaments, images, drawings, this material is suitable for room decoration in any style.
Soundproofing. Prevents noise from entering the apartment or house.
Easy care. Painted partitions can be easily cleaned of various contaminants using a normal wet sponge.
Simple installation. Each person can do sticking and painting with his own hands.
Elimination of defects. Any minor damage, patterns, stains can be easily fixed with a brush, there is no need to completely re-glue the canvas.
If desired, you can change the color.
Disadvantages:
Paint does not save from serious mechanical damage.
High price compared to traditional models.
Some types of coloring compounds attract dust.
There is no way to change the invoice.
Long lead time.
How many times can I repaint
Wallpaper, like other interior items, should be periodically changed. The service life of conventional paper models does not exceed 3 years, murals - 5 years. Products for painting are the most durable. They do not need to be re-glued, it is enough to periodically update or completely change their color. Experienced finishers recommend doing this at least once every 2-3 years.
Many owners have a question about the number of possible procedures for changing the shade. The answer to it can be obtained by looking at the packaging on which the manufacturer usually indicates all the characteristics. For each species, this parameter is different. The highest rate is for cullet, they can be repainted from 15 to 20 times. Other options - from 5 to 15 times.
A lot depends on the quality of the material used paint. Low-grade products may become unusable by the fifth staining. Also a lot depends on the texture and paint. Matte products quickly clog the relief, glossy ones emphasize it. It is best to use water-based formulations.
Particular attention should be paid to the glue that is used for wallpapering. If a cheap option is chosen, then even wallpapers suitable for repainting, after gaining weight, simply peel off and slide off the wall.
Types of wallpaper for painting: their advantages and disadvantages
When choosing a suitable product, its structure, thickness, and coating are taken into account. Not all wallpapers can be painted. Manufacturers produce several types of special models that differ in the material used in their production:
non-woven;
vinyl;
fiberglass.
These products are a fairly durable material, which has a layered structure, is characterized by moisture resistant properties.Their surface can be smooth or textured, with a pattern, ornament. Initially, they are white in color, there are cream options, very rarely colored, which do not need to be painted.
Vinyl
Vinyl wallpapers for painting consist of two main layers. The bottom is made of non-woven fabric. It serves for gluing the material to the surface of the wall. The top is represented by polyvinyl chloride. Such models will be an ideal option for interior decoration in new buildings that will shrink.
Paper-based products are not used for painting. The paper will swell, will not hold.
There are three types of standard vinyl wallpapers: washable, structural, based on foamed PVC, hot stamping. For painting, only models with a foamed top layer without embossing are used. Their advantages include:
they mask the roughness of the walls;
have good moisture resistance;
resistant to fire;
processed with a special antifungal coating;
have a wide range of textures, drawings.
The main disadvantage of this material is that vinyl spraying is quite fragile, it is easy to scratch, damage it. Paint solves this problem only partially.
Cullet
Products are obtained by interlacing filamentary glass fibers formed as a result of heating the glass. To give strength, the material is coated with a special starch-based adhesive. The result is an environmentally friendly product. All existing fiberglass models can be divided into:
Smooth. Characterized by high density. Used mainly for ceiling cladding.
Embossed. They have different drawings, three-dimensional images, ornaments. They are used for wall decoration.
Finished products differ in density. According to this characteristic, 3 main varieties are distinguished. The first - the highest quality, the third - allows for the presence of marriage. Manufacturers produce white and color options.Among the main advantages of wallpaper can be distinguished:
high environmental qualities;
tensile density can reach up to 3 tons per m²;
long term of operation;
the material is not electrified;
easy care;
Wallpaper can be repainted up to 20 times;
they can be used in rooms with high humidity;
not afraid of ultraviolet rays, do not fade;
fireproof.
Disadvantages:
high price;
when working, it is necessary to use protective equipment, since when cutting the material crumbles;
complex dismantling works;
a large volume of the coloring matter is spent on painting.
Non-woven
Products are manufactured in rolls. There are smooth and textured options that are made on the basis of non-woven. It is a chemically modified cellulose fiber, pressed together. Due to its characteristics, relatively low cost, finishing material is in demand. The main advantages of this raw material include:
environmentally friendly product;
allows you to change the appearance of the interior, the surface can be repainted up to 15 times;
simple installation, work can be done independently;
easy care;
allows you to hide small defects, small cracks;
not afraid of shrinkage of buildings;
provides good sound insulation.
Disadvantages:
heavy weight;
after several repaints, the texture is hidden under a layer of paint, especially under oil;
thin models can stretch during gluing.
Paint: basic rules of choice
Multicolored mixes for painting wallpapers will refresh the room at any time. The type of finish is suitable for lovers of frequent repairs, when there is no need to remove the base, but you can simply change its shade. Paint for canvases can create an elegant, rigorous coating. When choosing a material, it is necessary to take into account the protective functions, features, decorativeness of each type. The composition of a quality mixture should not include chemically active solvents.Each type of wallpaper uses its own paint:
Water emulsion. Basis - PVA. Only suitable for dry, darkened rooms. The painted surface cannot be washed because the mixture is water soluble;
Latex. Use in the kitchen, bathroom due to increased moisture resistance, resistance to abrasion, sunlight;
Acrylic Universal resin-based compound. Composite components increase the durability of the walls. After quick drying, a breathable layer forms between the wall and the wallpaper.
How to calculate the required amount of paint
The first thing to do before starting repairs is to prepare the necessary tools and calculate the paint consumption. The amount of mixture will depend on the area of the painted area. It is necessary to measure the height of the ceiling, the width of the area for painting, to take away the size of the openings, windows, unprocessed coatings.
Typically, manufacturers indicate on cans with liquid paint consumption, taking into account the type of wallpaper. If it is necessary to paint the walls several times, this figure increases at least one and a half times. About 150-200 g of paint will be spent per square meter. Wallpaper with rough surfaces (glass) in this regard is much more economical than paper.
Why primer is needed and how to choose a primer
Priming is mandatory only for absorbent webs (non-woven with fiberglass). For other coatings, this procedure remains recommended. Pre-primer will reduce paint consumption and ensure a uniform fit. After application, the mixture penetrates deep into the base, binds particles of building dust, fills all cracks and pores.
Manufacturers of building materials produce soil for wallpaper in a large assortment. These are universal formulations with special substances suitable for certain surfaces. More often use an acrylic primer.It dries quickly, does not emit an unpleasant odor when applied, has a minimum consumption compared to adhesive-based formulations. The only advantage of soils with PVA is low cost.
Choosing the right tools for painting
The choice of tools for painting wall paintings depends on the technology used, the size of the area to be trimmed, and the location. The following painting arsenal will simplify the work:
Rollers. There are several types. Foam rubber is used for smooth surfaces, with a fleecy painted corrugated wallpaper.
Brushes. It will take several pieces of different sizes. They can be taken to any inaccessible place, tinted gently the joint, the line along the baguette.
Sponges. Useful for shading some areas, correction of defects during operation.
Cuvette. Special tool for applying paint to the roller and wringing excess. Paint is poured into the recess of the bath, rolled out and impregnated on a ribbed surface.
Painting technology
Most manufacturers produce wallpaper for painting light tones to simplify the process of design and selection, combining colors. Mixtures can be applied only on dry surfaces, regardless of the type of material and the expected result. Monotonous wallpapers are suitable for official, serious rooms. You can simply apply a special reinforcing composition that does not affect the color of the base, or completely change the shade, make a new picture. Application of paint can be carried out by various technologies.
Billing Highlight
This staining technique allows you to create a three-dimensional pattern, lighten or darken it against the general background. In addition to aesthetic benefits, highlighting the texture will help to adjust the parameters of the room. The pronounced structure of many finishing materials is able to mask the relief of surfaces, make successful accents in certain areas.You can designate beautiful patterns on wallpaper with paint in several ways:
Painting the wrong side of the non-woven wallpaper. After drying and gluing to the wall, the paint shines through to the front side, creating a beautiful background for an expressive picture. The pattern can be left natural light or brought closer to the base by a special roller with a short thief.
Painting the wall under the wallpaper in bright color. The wallpaper base will soften the surface, thereby highlighting the convex pattern. It can also be painted or left white.
Partial paint stripping from freshly painted wallpapers. A damp rag on the surface makes slightly noticeable stains, dampens the brightness of the picture. After drying, it can be painted in a different color.
Combination of 2 or more colors
A combination of several close or opposite shades in the same room is used to highlight areas, to give relevance to a particular style. Creating a harmonious contrast will require some knowledge of color. Combine the shades of ceiling surfaces and walls according to certain rules:
Have related colors nearby (for example, lilac and gray, blue and mint);
Use gradient coloring of wallpaper - create smooth transitions from bright to pale colors and vice versa;
You can emphasize the main color with a combination of contrasting shades;
Use in a large volume, for example, on opposite walls, ceilings, colors found in nature. It combines blue and beige, green and brown.
Of great importance is the area, the location of the colored wallpaper. Depending on the goal and design idea, apply several models for combining shades. For zoning, a combination of vertical colors is used, most often a gradient. Diagonal, horizontal separation is used for visual expansion, narrowing of space.
Drawing a picture on the wallpaper with your own hands
You can create a unique interior with the help of drawings. You can stain wallpaper in various techniques. Any basis is suitable for this. Simple decoration is done with a brush or spray gun, complex compositions are realized with a textured roller and other tools. You can decorate a paper surface with your own hands in the following ways:
Using a convex roller. The paint application tool consists of two parts - a rubber and textured coil. With independent painting, the wall is divided into strips, they pass with a roller clearly along the line so that the rhythm of the picture does not go astray, and the pattern is not smeared.
Using a stencil. The template can be bought at the store or made independently from cardboard, plastic or film. The stencil is attached to the wall with masking tape and applied with a foam sponge.
Stamping method. You can use special devices with a convenient handle or improvised means (cork stopper, broom, own palm). The entire surface of the stamp is evenly coated with paint, pressed to the wallpaper. Using a sponge, the plugging method can create an abstract pattern.
Drawing the simplest patterns, painting. To draw on the wallpaper rings, squares, triangles of various sizes can even a master who is not related to art. With a full picture, difficulties may arise. To simplify the task, use a projector. A sheet with a drawing is brought to the magnifier and sent to the wall. The picture is outlined with a pencil, the edges are pasted over with masking tape and decorated.
DIY painting technology
The process of painting wallpaper is no different from working with other types of surfaces. In all cases, it will be necessary to prepare the premises, choose the right paint, and provide for the availability of the necessary tools. Wall painting is carried out clearly in stages, in compliance with the drying time of the primer layers, the setting period of all materials.To color the wallpaper without streaks and rough color transitions, technology should be strictly observed.
How long can I paint after gluing
You can paint the wallpaper only after the glue has completely dried. Manufacturers of paints and varnishes and paintings recommend waiting at least 48 hours. If you apply the paint before the due date, you can spoil the decorative finish. With a high probability, simple wallpapers will stain and may even move away from the wall. The movement of the roller will provoke the elongation of the villi in the glass.
Drying time is influenced by many factors. This is the temperature in the room, humidity, type of paintings, the presence of drafts. Recommended conditions for quick drying - temperature 18-25 ° C, humidity - not more than 70%, closed windows. It is very difficult to notice deviations of such indicators without special devices in a house or apartment. The first signs of high humidity are fogged windows.
Surface preparation
Preparations for painting wallpaper are an important stage that should not be missed. The entire surface to be decorated should be clean without signs of mold and damage by microorganisms. The slightest moisture must be removed with a dry cloth and let the wall dry well. Dust, cobwebs must be washed off with a dry brush or vacuum cleaner.
On some types of wallpaper before painting it is necessary to apply a water-repellent coating. Using a roller or brush, distribute the composition over the entire surface, not forgetting about corners and other hard-to-reach spots. After complete drying, it is necessary to seal with a masking tape all possible places where the paint touches other surfaces - the baseboard, ceiling, slopes.
Primer
In addition to water-repellent impregnation, a primer must be applied to the wallpaper before painting. Such a procedure will help reduce the consumption of the coloring mixture, strengthen the fibers of the main wall decoration, and minimize the appearance of stains and color irregularities. To apply the material, use a brush or roller.The following compositions are used for priming canvases:
On a latex basis. Used to give the fortress to heavy bases of mineral origin. Mixtures are quickly and deeply absorbed into the surface, even out distorted relief of any size.
Reinforced acrylic compounds. They strengthen loose materials well, dry quickly, have no smell.
Special glue for priming. The thick mixture is diluted with water in certain proportions. Apply with a roller, dry and re-treat the surface.
Paint Tips
The thickness of the paint layer at first application depends on the type of wallpaper and the expected result. It is better if it is moderate, without sag and divorce. Each subsequent coloring will deepen the shade, making it saturated. If the paint is uneven, the appearance can be corrected - go through this place again until the mixture begins to thicken. The resulting smudges should be shaded with a dry sponge and repainted.
Repeated application of the second and subsequent layers is possible only after the first has completely dried.
For coloring wallpapers it is better to use a roller. A brush is needed only for minor strokes. Moving with any paint tool is necessary from top to bottom, from the ceiling to the floor. Thanks to simple reception, strokes will not be noticeable in clear light in the kitchen and in the dark corridor.
What kind of wallpaper is not recommended
The pattern and color of the wallpaper has long been not decisive when choosing wall finishes. The main thing is to choose the right rolled material that meets all the requirements of the owner of an apartment or house. The wall can be repainted over time in any color, but the texture and convex pattern will be difficult to change. Some coating options are unsuitable for staining due to the fragility, difficulty in further care. These include:
Fabrics with textile impregnations;
Vinyl with a paper base;
Single-layer paper that cannot be washed;
Acrylic with a smooth surface;
Flat vinyl coatings (foamed, hot stamped);
Photowall-paper.
Interior Design Ideas in Various Colors and Styles
The color scheme plays an important role in choosing the final look of the room. The color of the surfaces attracts the main attention, therefore it should ideally harmonize with the overall design of the room. Properly selected shades are able to distract the eyes from unsuccessful accessories, old chandeliers, worn linoleum.
Cold tones (blue, gray, blue, steel) are suitable for modern interiors. The classical style accepts elaborate accents - the wallpaper on one of the walls can be painted with golden vertical stripes or decorated with symmetrical large patterns.
Flowing ornament, large interwoven patterns on the wall paintings are characteristic of the Baroque style. Revive such a room textured staining. The basis of the wallpaper can be made light beige, convex lines are brown.
Conclusion
By repainting the walls you can revive the interior of any room. Simple cosmetic repairs do not require large financial investments and labor costs. On the canvases, you can create unique patterns in various techniques, depict your own unique landscape.
Painted walls are in demand all over the world. They have long supplanted many types of finishes. This is easy to see, just read the most popular magazines on interior design. However, such an operation requires very careful preparation of the surface, which should be perfectly smooth, otherwise the slightest flaws will be visible. For most ordinary residents who are used to doing all the repair work on their own, to perform such actions will be very problematic. But do not be upset, you can solve the problem by painting the wallpaper. Manufacturers produce several special models: vinyl, non-woven, glass. They will help transform the living space, arrange it in accordance with the requirements.
Content
Painting Features
Wallpaper for painting are special models characterized by the absence of a pattern and the presence of relief. Popular material is more expensive than conventional analogues, but has a long service life. This is ideal for fans of changing the environment, just repaint the surface in a different tone. Manufacturers produce mainly white, and only in rare cases, color specimens are found.
When painting wallpaper, you must follow the rules that allow you to achieve the best results. Paint can only be applied on a dry cloth, so after gluing it is necessary to wait a certain period, usually 2 days is enough. Before starting work, it is required to protect the floor, ceiling, windows from accidental ingress of coloring matter. For these purposes, polyethylene is suitable, the joints are closed with masking tape.
Paint is selected depending on the type of wallpaper chosen. For non-woven models, it is recommended to use latex-based products; for vinyl, an emulsion of water is suitable; cullet can be painted with acrylic and latex coloring compounds. Before applying, you should read the instructions that came with the purchase. Some species must be bred, other compounds are used without preparation.
Paint is usually applied in two layers. The first is the primer, the second is the finish.An interval of 12 hours should be maintained between them. During this time, the first layer will completely dry. So that after painting no transitions are visible, the surface must be painted in one pass. For hard to reach places, small rollers and brushes are used.
After drying of the main coating, the surface can be decorated with various ornaments, images, then coated with colorless varnish. The process of applying this layer is similar to the previous one, also occurs in two stages. For work, you can use glossy or matte options. This coating is easily cleaned from contamination.
Advantages and disadvantages of painting
The method of decorating walls using wallpaper for painting is popular. Despite the higher cost compared to standard models, this option is chosen for many reasons, taking into account all the positive characteristics:
Disadvantages:
How many times can I repaint
Wallpaper, like other interior items, should be periodically changed. The service life of conventional paper models does not exceed 3 years, murals - 5 years. Products for painting are the most durable. They do not need to be re-glued, it is enough to periodically update or completely change their color. Experienced finishers recommend doing this at least once every 2-3 years.
Many owners have a question about the number of possible procedures for changing the shade. The answer to it can be obtained by looking at the packaging on which the manufacturer usually indicates all the characteristics. For each species, this parameter is different. The highest rate is for cullet, they can be repainted from 15 to 20 times. Other options - from 5 to 15 times.
A lot depends on the quality of the material used paint. Low-grade products may become unusable by the fifth staining. Also a lot depends on the texture and paint. Matte products quickly clog the relief, glossy ones emphasize it. It is best to use water-based formulations.
Types of wallpaper for painting: their advantages and disadvantages
When choosing a suitable product, its structure, thickness, and coating are taken into account. Not all wallpapers can be painted. Manufacturers produce several types of special models that differ in the material used in their production:
These products are a fairly durable material, which has a layered structure, is characterized by moisture resistant properties.Their surface can be smooth or textured, with a pattern, ornament. Initially, they are white in color, there are cream options, very rarely colored, which do not need to be painted.
Vinyl
Vinyl wallpapers for painting consist of two main layers. The bottom is made of non-woven fabric. It serves for gluing the material to the surface of the wall. The top is represented by polyvinyl chloride. Such models will be an ideal option for interior decoration in new buildings that will shrink.
There are three types of standard vinyl wallpapers: washable, structural, based on foamed PVC, hot stamping. For painting, only models with a foamed top layer without embossing are used. Their advantages include:
The main disadvantage of this material is that vinyl spraying is quite fragile, it is easy to scratch, damage it. Paint solves this problem only partially.
Cullet
Products are obtained by interlacing filamentary glass fibers formed as a result of heating the glass. To give strength, the material is coated with a special starch-based adhesive. The result is an environmentally friendly product. All existing fiberglass models can be divided into:
Finished products differ in density. According to this characteristic, 3 main varieties are distinguished. The first - the highest quality, the third - allows for the presence of marriage. Manufacturers produce white and color options.Among the main advantages of wallpaper can be distinguished:
Disadvantages:
Non-woven
Products are manufactured in rolls. There are smooth and textured options that are made on the basis of non-woven. It is a chemically modified cellulose fiber, pressed together. Due to its characteristics, relatively low cost, finishing material is in demand. The main advantages of this raw material include:
Disadvantages:
Paint: basic rules of choice
Multicolored mixes for painting wallpapers will refresh the room at any time. The type of finish is suitable for lovers of frequent repairs, when there is no need to remove the base, but you can simply change its shade. Paint for canvases can create an elegant, rigorous coating. When choosing a material, it is necessary to take into account the protective functions, features, decorativeness of each type. The composition of a quality mixture should not include chemically active solvents.Each type of wallpaper uses its own paint:
How to calculate the required amount of paint
The first thing to do before starting repairs is to prepare the necessary tools and calculate the paint consumption. The amount of mixture will depend on the area of the painted area. It is necessary to measure the height of the ceiling, the width of the area for painting, to take away the size of the openings, windows, unprocessed coatings.
Typically, manufacturers indicate on cans with liquid paint consumption, taking into account the type of wallpaper. If it is necessary to paint the walls several times, this figure increases at least one and a half times. About 150-200 g of paint will be spent per square meter. Wallpaper with rough surfaces (glass) in this regard is much more economical than paper.
Why primer is needed and how to choose a primer
Priming is mandatory only for absorbent webs (non-woven with fiberglass). For other coatings, this procedure remains recommended. Pre-primer will reduce paint consumption and ensure a uniform fit. After application, the mixture penetrates deep into the base, binds particles of building dust, fills all cracks and pores.
Manufacturers of building materials produce soil for wallpaper in a large assortment. These are universal formulations with special substances suitable for certain surfaces. More often use an acrylic primer.It dries quickly, does not emit an unpleasant odor when applied, has a minimum consumption compared to adhesive-based formulations. The only advantage of soils with PVA is low cost.
Choosing the right tools for painting
The choice of tools for painting wall paintings depends on the technology used, the size of the area to be trimmed, and the location. The following painting arsenal will simplify the work:
Painting technology
Most manufacturers produce wallpaper for painting light tones to simplify the process of design and selection, combining colors. Mixtures can be applied only on dry surfaces, regardless of the type of material and the expected result. Monotonous wallpapers are suitable for official, serious rooms. You can simply apply a special reinforcing composition that does not affect the color of the base, or completely change the shade, make a new picture. Application of paint can be carried out by various technologies.
Billing Highlight
This staining technique allows you to create a three-dimensional pattern, lighten or darken it against the general background. In addition to aesthetic benefits, highlighting the texture will help to adjust the parameters of the room. The pronounced structure of many finishing materials is able to mask the relief of surfaces, make successful accents in certain areas.You can designate beautiful patterns on wallpaper with paint in several ways:
Combination of 2 or more colors
A combination of several close or opposite shades in the same room is used to highlight areas, to give relevance to a particular style. Creating a harmonious contrast will require some knowledge of color. Combine the shades of ceiling surfaces and walls according to certain rules:
Of great importance is the area, the location of the colored wallpaper. Depending on the goal and design idea, apply several models for combining shades. For zoning, a combination of vertical colors is used, most often a gradient. Diagonal, horizontal separation is used for visual expansion, narrowing of space.
Drawing a picture on the wallpaper with your own hands
You can create a unique interior with the help of drawings. You can stain wallpaper in various techniques. Any basis is suitable for this. Simple decoration is done with a brush or spray gun, complex compositions are realized with a textured roller and other tools. You can decorate a paper surface with your own hands in the following ways:
DIY painting technology
The process of painting wallpaper is no different from working with other types of surfaces. In all cases, it will be necessary to prepare the premises, choose the right paint, and provide for the availability of the necessary tools. Wall painting is carried out clearly in stages, in compliance with the drying time of the primer layers, the setting period of all materials.To color the wallpaper without streaks and rough color transitions, technology should be strictly observed.
How long can I paint after gluing
You can paint the wallpaper only after the glue has completely dried. Manufacturers of paints and varnishes and paintings recommend waiting at least 48 hours. If you apply the paint before the due date, you can spoil the decorative finish. With a high probability, simple wallpapers will stain and may even move away from the wall. The movement of the roller will provoke the elongation of the villi in the glass.
Drying time is influenced by many factors. This is the temperature in the room, humidity, type of paintings, the presence of drafts. Recommended conditions for quick drying - temperature 18-25 ° C, humidity - not more than 70%, closed windows. It is very difficult to notice deviations of such indicators without special devices in a house or apartment. The first signs of high humidity are fogged windows.
Surface preparation
Preparations for painting wallpaper are an important stage that should not be missed. The entire surface to be decorated should be clean without signs of mold and damage by microorganisms. The slightest moisture must be removed with a dry cloth and let the wall dry well. Dust, cobwebs must be washed off with a dry brush or vacuum cleaner.
On some types of wallpaper before painting it is necessary to apply a water-repellent coating. Using a roller or brush, distribute the composition over the entire surface, not forgetting about corners and other hard-to-reach spots. After complete drying, it is necessary to seal with a masking tape all possible places where the paint touches other surfaces - the baseboard, ceiling, slopes.
Primer
In addition to water-repellent impregnation, a primer must be applied to the wallpaper before painting. Such a procedure will help reduce the consumption of the coloring mixture, strengthen the fibers of the main wall decoration, and minimize the appearance of stains and color irregularities. To apply the material, use a brush or roller.The following compositions are used for priming canvases:
Paint Tips
The thickness of the paint layer at first application depends on the type of wallpaper and the expected result. It is better if it is moderate, without sag and divorce. Each subsequent coloring will deepen the shade, making it saturated. If the paint is uneven, the appearance can be corrected - go through this place again until the mixture begins to thicken. The resulting smudges should be shaded with a dry sponge and repainted.
For coloring wallpapers it is better to use a roller. A brush is needed only for minor strokes. Moving with any paint tool is necessary from top to bottom, from the ceiling to the floor. Thanks to simple reception, strokes will not be noticeable in clear light in the kitchen and in the dark corridor.
What kind of wallpaper is not recommended
The pattern and color of the wallpaper has long been not decisive when choosing wall finishes. The main thing is to choose the right rolled material that meets all the requirements of the owner of an apartment or house. The wall can be repainted over time in any color, but the texture and convex pattern will be difficult to change. Some coating options are unsuitable for staining due to the fragility, difficulty in further care. These include:
Interior Design Ideas in Various Colors and Styles
The color scheme plays an important role in choosing the final look of the room. The color of the surfaces attracts the main attention, therefore it should ideally harmonize with the overall design of the room. Properly selected shades are able to distract the eyes from unsuccessful accessories, old chandeliers, worn linoleum.
Cold tones (blue, gray, blue, steel) are suitable for modern interiors. The classical style accepts elaborate accents - the wallpaper on one of the walls can be painted with golden vertical stripes or decorated with symmetrical large patterns.
Flowing ornament, large interwoven patterns on the wall paintings are characteristic of the Baroque style. Revive such a room textured staining. The basis of the wallpaper can be made light beige, convex lines are brown.
Conclusion
By repainting the walls you can revive the interior of any room. Simple cosmetic repairs do not require large financial investments and labor costs. On the canvases, you can create unique patterns in various techniques, depict your own unique landscape.