Examples of decoration with decorative stone hallway, living room - 30 photos
In the construction market, you can find many types of decorative stone. This finishing material imitates the texture and shape of its natural counterpart, and also has several advantages over it. The popularity of an artificial product is due to its significantly lower cost with high performance properties. Following the recommendations, decoration with decorative stone can be done independently. The appearance of the finished surface sometimes does not allow to distinguish the facing material from natural stone, however, it is important to determine which is best to use for the same hallway. The right choice will help to design an interior design that will delight home owners for many years. Therefore, further we will tell about its varieties and styling technology.
To characterize the facing material, it is enough to list its advantages. The owners of country houses were the first to know about them when they discovered excellent properties in the stone purchased on the market. Let's try to list them briefly:
The cost of artificial products is much less than their natural counterparts;
The strength of the samples is ensured by a homogeneous structure. Thanks to the factory manufacturing, accidental destruction of the stone is excluded;
The weight of imitation products is much less, which allows to do without strengthening the foundation;
Installation is extremely easy, as the stone has one side flat. If it is a tile, then it has perfect geometric shapes;
Processing of the material is extremely easy; it lends itself well to sawing;
Also in the assortment you can find products with a variety of cutting technology, corner and outdoor models;
The surface for decorating the hallway with a stone can be any: wooden, stone;
When choosing premises, there are also no restrictions, since the material is not afraid of ultraviolet radiation, fungus or dampness;
Moisture resistance of artificial decor elements allows you to operate them in a shower;
The aesthetic qualities of the fake stone make it possible to perfectly harmonize with other types of facing materials;
Artificial stone in the hallway
The design of the external coating is so accurate that it is sometimes difficult to distinguish a fake from the original;
The factory assortment is infinitely wide and able to satisfy everyone without exception;
Damaged elements of the finished surface are easily replaced, repair is not difficult;
The anti-static of artificial stones prevents dust or grease from appearing on the surface.Ultimate ease of care for products is to wipe the wall with a normal brush or rag;
The ecological composition of the ingredients guarantees the safety of the artificial product and the absence of emissions of harmful substances;
Lightness and perfect symmetry of products facilitate their transportation.
Wall decor in the living room under a stone
Such a number of useful properties allowed the product to gain fame in a short time: the owners of suburban mansions began to use it massively for decoration. It has practically no shortcomings, but differs in composition class. Inexpensive material can be susceptible to abrasion and the harmful effects of an aggressive environment (for example, when it comes to the kitchen). An additional protective coating is required. The durability of the artificial stone is slightly less than that of a natural element. The main disadvantage of decorative stone in the hallway is not so much its some property, but less durable fastenings. If he can last several decades, then they will fail earlier. To ensure the longest possible service life and the invariability of the presentation of the product, it is necessary to make the right choice of texture for a particular room.
Cladding bedroom wall with artificial stone
Varieties of decorative product
Production facilities in modern factories allow producing all kinds of construction products. As well as appearance, the composition of various types of material is different, which directly affects its properties. Among the main players in the market, the following types of decorative finishing stone stand out:
Porcelain tile. The characteristics of this type allow it to be used for the decoration of exterior facades. The composition of porcelain tiles includes feldspar, high-quality clay, as well as dyes. The manufacturing process involves pressing and firing the material.The consequences of such processing is the high strength of the product and its moisture resistance. Tiles can be used to cover the walls of a shower room. Uniform coloring is ensured due to the uniform structure throughout the depth of the sample. The factory assortment offers users various geometric shapes of tiles, color schemes (mat or gloss), texture features (polishing or roughness). The section shows the same texture as that of natural stone. Products from porcelain stoneware calmly withstand temperature changes, but they should not be subjected to chemical attack.
Wall decoration with light decorative stone in the dining room
For cladding external walls, it is recommended to use a thick tile from 14 mm.
Agglomerates. Decorating the hallway with decorative stone from agglomerates very accurately mimics the external properties of natural elements in nature. For their production, a special filler (granite chips, quartz sand), an adhesive binder (polyester resin) and pigment dyes are used. The most popular was the agglomerates of quartz, as they are distinguished by their strength and elegant appearance. The hardness of the product allows it to be used for the decoration of exterior facades.
Concrete or gypsum based products.
Decorative stone on the bedroom wall with a combination of painted walls
Despite the attractiveness of the previous types, the most common are still building materials made of concrete and gypsum. Production technology gives sand-cement products a sufficiently high strength, allowing them to be used to decorate the hallway. The properties of gypsum and concrete material are slightly different:
Gypsum stone can be processed using a hand tool, concrete - cut with a grinder;
Plaster samples are two times lighter than concrete, which allows them to be installed on drywall;
The smooth surface of concrete stones decorates external walls better than gypsum;
The cost of gypsum products is slightly lower compared to concrete material.
Bar counter and large stone
With all the differences, the manufacturing technology for these materials is the same: pouring into geometric shapes.
Stone wall in the living room
Finished products are recommended to be coated with moisture resistant acrylic impregnation. Then they become gypsum polymer.
The combination of stone and dark wallpaper for painting
Recommendations for choosing a decorative stone for facing
Competent decoration involves many aspects. Due to the low light of the hall, it is recommended to use warm tones of artificial material. The small area of the hallway involves the use of small tiles, since a large texture will make the space heavy. If the stone is used too densely in the interior, it can create an undesirable effect of a dark cave. To reduce the gloominess of such a tunnel, it is necessary to organize additional lighting or alternate stone sections with other types of finishes. Narrow rooms should not be decorated with dark stone.
Masonry tile
In the bedroom, a stone pebble insert at the head of a large sofa will look great. A similar texture is good to use near the fireplace. The tile will well decorate the place where a flat-screen TV will be installed. In the kitchen, a decorative stone helps to zone the space, creates an apron insert near the sink. In the bathroom, they like to use bright glossy samples of moisture-resistant material. Porcelain tiles on separate sections of the walls look great.
The best look is decorative stone in the hallway, as it is a guest area with many doorways. The optimal combination of artificial material with painted walls. You need to choose the right color scheme to make it look harmonious.The use of high-tech style will perfectly complement the stone surface with elements of glass or metal. Good lighting is required here.
Decorating the hallway with decorative stone involves covering the imitation surface with semi-matt acrylic impregnation.
Stone walls are widely used in the premises of the winter garden, where the rough texture of light building materials can emphasize its airiness. This will be especially evident in contrast to the dark wooden frames on the windows.
Wall decoration technology
Before installation, you will need to go through a number of stages in a row and carry out preparatory work:
The wall must be cleaned of grease and dust, old finish;
Consider in advance the placement of utilities and electrical structures;
The wall plane should be leveled if the curvature exceeds 0.2 mm / m. An exception can only be made for the rough texture of building materials;
Existing cracks should be repaired with plaster, and then apply a layer of leveling putty. If necessary, it is possible to use the reinforcement method. The best option for alignment can serve as wall cladding with plasterboard sheets;
When the wall is fairly even, it must be treated with a suitable primer;
To speed up installation and accurately determine the number of products, it is recommended to draw a sketch of the finished cladding on the prepared wall. Or, according to the method of puzzles, lay out decorative patterns on the floor;
Example of laying in the kitchen
An adhesive binder is used to fix the tiles to the walls. If you properly prepare the solution, it will fix the simulation image for many years. The glue recipe looks simple: a special powder is combined in the right proportions (indicated on the package) with water, and then whipped with a mixer. The finished solution is able to fix even bulky stones. For small products, it is possible to use liquid nails or a budget sand-cement mortar.
Stone panel, stylish and rich
DIY stone laying
The operational characteristics of decorative stone allow you to do your own laying work. The simplicity of the procedure is ensured by the use of special beacons at the corners of the prepared wall and the cord, which is attached to them in a horizontal plane. During installation, the top end of the decorative elements is adjusted to a tightly stretched horizontal. The operation itself starts from the corner in one of three possible ways:
an expensive method involves the use of corner stones and provides installation speed;
with a suitable texture it is possible to use the overlap method;
independent trimming of the ends of decorative tiles by means of a grinder slightly increases the installation time.
Wild stone wall
An adhesive binder is applied to the wall along the entire length of the horizontal segment. After arranging the corner of the wall, all other elements are fixed to each other. It is important to remove the protruding adhesive solution in a timely manner so that the aesthetic appearance of the wall is not affected. Seam uniformity can be achieved by installing mounting crosses.
Interior decoration of the corridor in the apartment
After the first row was fixed - the horizontal level in the form of a cord with beacons moves higher. Before gluing the next row, you must wait until the previous one is fixed and dries. The vertical direction does not matter, the simulation elements can be mounted both from below and from above. When using the bottom-up direction, it is possible for the adhesive binder to hit the bottom row of fixed elements. Finally, the liquid glue will dry after two days, after which you can proceed to repair the joints between the tiles. The usual putty or concrete-adhesive mastic is used. A laying defect such as chips or cracks is masked by means of an airbrush, which is made of the following components: water, acrylic varnish, tonal additive.It is also useful to coat the finished surface with a water-repellent layer. This can be considered the job of laying decorative stone with your own hands completed.
Living room and exit to the terrace
Conclusion
Subject to the above recommendations, wall decoration with decorative stone is possible to do it yourself. A competent approach to the selection and installation of building materials will create a chic interior design type.
In the construction market, you can find many types of decorative stone. This finishing material imitates the texture and shape of its natural counterpart, and also has several advantages over it. The popularity of an artificial product is due to its significantly lower cost with high performance properties. Following the recommendations, decoration with decorative stone can be done independently. The appearance of the finished surface sometimes does not allow to distinguish the facing material from natural stone, however, it is important to determine which is best to use for the same hallway. The right choice will help to design an interior design that will delight home owners for many years. Therefore, further we will tell about its varieties and styling technology.
Content
Material Features
To characterize the facing material, it is enough to list its advantages. The owners of country houses were the first to know about them when they discovered excellent properties in the stone purchased on the market. Let's try to list them briefly:
Such a number of useful properties allowed the product to gain fame in a short time: the owners of suburban mansions began to use it massively for decoration. It has practically no shortcomings, but differs in composition class. Inexpensive material can be susceptible to abrasion and the harmful effects of an aggressive environment (for example, when it comes to the kitchen). An additional protective coating is required. The durability of the artificial stone is slightly less than that of a natural element. The main disadvantage of decorative stone in the hallway is not so much its some property, but less durable fastenings. If he can last several decades, then they will fail earlier. To ensure the longest possible service life and the invariability of the presentation of the product, it is necessary to make the right choice of texture for a particular room.
Varieties of decorative product
Production facilities in modern factories allow producing all kinds of construction products. As well as appearance, the composition of various types of material is different, which directly affects its properties. Among the main players in the market, the following types of decorative finishing stone stand out:
Despite the attractiveness of the previous types, the most common are still building materials made of concrete and gypsum. Production technology gives sand-cement products a sufficiently high strength, allowing them to be used to decorate the hallway. The properties of gypsum and concrete material are slightly different:
With all the differences, the manufacturing technology for these materials is the same: pouring into geometric shapes.
Recommendations for choosing a decorative stone for facing
Competent decoration involves many aspects. Due to the low light of the hall, it is recommended to use warm tones of artificial material. The small area of the hallway involves the use of small tiles, since a large texture will make the space heavy. If the stone is used too densely in the interior, it can create an undesirable effect of a dark cave. To reduce the gloominess of such a tunnel, it is necessary to organize additional lighting or alternate stone sections with other types of finishes. Narrow rooms should not be decorated with dark stone.
In the bedroom, a stone pebble insert at the head of a large sofa will look great. A similar texture is good to use near the fireplace. The tile will well decorate the place where a flat-screen TV will be installed. In the kitchen, a decorative stone helps to zone the space, creates an apron insert near the sink. In the bathroom, they like to use bright glossy samples of moisture-resistant material. Porcelain tiles on separate sections of the walls look great.
The best look is decorative stone in the hallway, as it is a guest area with many doorways. The optimal combination of artificial material with painted walls. You need to choose the right color scheme to make it look harmonious.The use of high-tech style will perfectly complement the stone surface with elements of glass or metal. Good lighting is required here.
Stone walls are widely used in the premises of the winter garden, where the rough texture of light building materials can emphasize its airiness. This will be especially evident in contrast to the dark wooden frames on the windows.
Wall decoration technology
Before installation, you will need to go through a number of stages in a row and carry out preparatory work:
An adhesive binder is used to fix the tiles to the walls. If you properly prepare the solution, it will fix the simulation image for many years. The glue recipe looks simple: a special powder is combined in the right proportions (indicated on the package) with water, and then whipped with a mixer. The finished solution is able to fix even bulky stones. For small products, it is possible to use liquid nails or a budget sand-cement mortar.
DIY stone laying
The operational characteristics of decorative stone allow you to do your own laying work. The simplicity of the procedure is ensured by the use of special beacons at the corners of the prepared wall and the cord, which is attached to them in a horizontal plane. During installation, the top end of the decorative elements is adjusted to a tightly stretched horizontal. The operation itself starts from the corner in one of three possible ways:
An adhesive binder is applied to the wall along the entire length of the horizontal segment. After arranging the corner of the wall, all other elements are fixed to each other. It is important to remove the protruding adhesive solution in a timely manner so that the aesthetic appearance of the wall is not affected. Seam uniformity can be achieved by installing mounting crosses.
After the first row was fixed - the horizontal level in the form of a cord with beacons moves higher. Before gluing the next row, you must wait until the previous one is fixed and dries. The vertical direction does not matter, the simulation elements can be mounted both from below and from above. When using the bottom-up direction, it is possible for the adhesive binder to hit the bottom row of fixed elements. Finally, the liquid glue will dry after two days, after which you can proceed to repair the joints between the tiles. The usual putty or concrete-adhesive mastic is used. A laying defect such as chips or cracks is masked by means of an airbrush, which is made of the following components: water, acrylic varnish, tonal additive.It is also useful to coat the finished surface with a water-repellent layer. This can be considered the job of laying decorative stone with your own hands completed.
Conclusion
Subject to the above recommendations, wall decoration with decorative stone is possible to do it yourself. A competent approach to the selection and installation of building materials will create a chic interior design type.