Decorative partitions in the interior of the room - zoning ideas
When there is a need for redevelopment of a single room or apartment as a whole, decorative partitions can come to the rescue. Since they not only perform an aesthetic function in the interior, but also serve as an excellent tool for zoning. The initial layout could be extremely unsuccessful: small rooms caused claustrophobia, and large ones were too uncomfortable, too spacious. In such cases, partitions allow you to rationally use the usable area and correctly delimit the space. And the design execution of these practical products guarantees the transformation of the interior beyond recognition. Sometimes this is the only right decision that the owner of the house can make in order to achieve comfort. Next, we consider the main characteristics and options for their application.
The use of decorative products in a modern interior
The choice of suitable decorative elements directly depends on the room that needs to be decorated. Based on its parameters, functional tasks and general style, one or another type of decorative partitions should be selected. The shape of the products must also take into account the characteristics of a given space.
Among the advantages of using this decorative element are noted such as:
Aesthetics and originality of performance;
A wide range of materials used;
Lack of restrictions for design ideas;
Long service life;
The environmental aspect.
The disadvantages include poor sound insulation or the relatively high cost of some models. Depending on the layout, there are two main types of decorative partitions in the interior:
Partitions for zoning the room;
Interior partitions in the interior.
Partitions can be sliding (rotary) and stationary. The former are often used as interior sliding doors on roller rails.
The use of partitions depending on the purpose of the rooms
Living room
The versatility of this room puts forward its requirements for the organization of space. Since not only a festive reception of guests is held here, but also often a family dinner. All family members gather to discuss each their own interests. Therefore, it is necessary to fully satisfy their potential needs. It is even possible to use several decorative partitions.
Before installing the product, you need to make sure that the place for its placement is chosen correctly.
It is recommended that you read articles on the design of a modern interior, which may offer different options for zoning rooms. The arguments that are given there may affect the future layout. For example, you can divide the dining area and the place to relax with an elegant screen or a stylish glass partition. The use of specific materials should focus on common color scheme living room, a type of furniture.
Another option to place many different accessories, colors or books can be a decorative partition - a rack. The comfort that it can provide allows you to fill the modern interior of the room with real cosiness. A similar effect can be achieved when used as a partition - decorative, integrated aquarium. Since its sides will be open to both zones, he will be able to carry out the difficult task: to decorate each zone, while leaving them separate from each other.
Bedroom
Often, in small apartments have to combine bedroom with study. The lack of space has an acute effect on the general feeling, which leads to the impossibility of both rest and fruitful work.
The use of decorative partitions helps to solve this problem. A screen of various shapes allows you to provide privacy to each member of the couple.
Translucent carved partition between the living room and the bedroom
Kitchen
The main function of the partition in this room is to delimit the space for cooking and eating. Partitions in the interior of the kitchen stylishly ennoble dining area, at the same time allowing to improve the practicality of the cooking area.
A wire screen on a wooden frame seems to be very convenient in operation.It is used to place kitchen accessories, the care of galvanized material is extremely simple. Such a decorative partition can have a variety of forms.
Children's room
It will require a division into three functional zones: for recreation, study, as well as a playground. Such zoning allows you to leave a mess in the place provided for this. Another space will be used for practical educational purposes. Often, for such an organization of the interior, a decorative box-shaped partition is used to additionally be able to fill it with something useful.
The main types of decorative partitions in the interior
Decorative partitions in the interior, designed for zoning the room, can radically modify the perception of space with minimal means. Moreover, achieving the desired effect does not imply the destruction of the wall or ceiling surfaces of the room.
Only partial dismantling of the floor covering is required. The parameters and shape of the designer product are chosen according to the taste of the owner, since there can be no significant restrictions. The partition for zoning the room can reach ceiling heights or not exceed the growth of the smallest member of the family. The situation is similar with width. As for the selection of material, we consider further the existing types.
Drywall
With the help of this material, you can realize almost any fantasy, since their installation or dismantling does not imply absolutely any difficulties. Drywall products are characterized by low weight, lightness, which determines the methods of their use. Finishing the surface of such a partition can be very different.
It is not recommended to give a serious load to the decorative partition made of drywall. Maximum up to 15 kg. It also has a high moisture permeability.
The demand for this type of decorative element is due to the fact that it allows you to reliably hide engineering communications and is fire resistant.
Brick
This traditional material is also very popular. Usually decorative brick It is used where stationary partitions cannot be dispensed with, since dismantling of this type is characterized by its obvious laboriousness. The design properties of the noble material are great for a variety of interior styles (country, provence, etc.).
Tree
Wooden partitions are perfectly combined with any style of the room, with the exception of frank hi-tech. Often are the main element of the decor, attracting all the attention of guests. A carved, perfectly polished natural wood product exquisitely decorates the interior.
The material for the frame of one or another structure can serve as boards (timber) and MDF. Finishing involves the processing of natural material with paint and varnish solutions. After this procedure, the wooden partition will be distinguished by its reliability and resistance to mechanical stress. Among the disadvantages of using the material are called fire hazard, as well as the inadmissibility of excessive moisture.
Glass
Glass products are designed to maximize the preservation of usable space, while leaving a feeling of openness. Frosted glass partitions quite clearly delineate the functional areas without weighting or reducing the interior visually.
The disadvantages of this type include the obvious need for regular cleaning of the glass plane, as well as the inability to hide engineering communications in the decorative element. However, the aesthetic side of the material compensates for this drawback.
It is possible to apply patterns to the glass, as well as photographs.
Glass is used both for stationary partitions and as a sliding screen.The advantages of using this material include the absence of obstacles to the passage of light, resistance to changes in humidity and temperature, and durability.
the cloth
When a solid partition is not required, fabric partitions (curtains, drapes) are used for zoning rooms. Features of the material involve both swivel and sliding partitions. For this decorative element, installation of a special cornice with guides is required under the ceiling.
Using this design allows the canvas to easily slide and delimit the space of living rooms. In the bedroom, a fabric screen makes it possible to retire, and in the living room organize a home theater.
Rack
Convenience rack designs lies in the further arrangement on the open shelves of various accessories, whether it be books or lamps. Moreover, the shelves can be opened on several sides, for each functional area.
Metal forging
For this decorative element, a certain approach is required, since it will look under the condition of a particular style of room decoration.
You can name such interior design options as modern or art deco. Forged metal is used when necessary. place a fireplace in one of the sections of the room. Polished steel - when design is a high-tech style.
Making decorative items with your own hands
Partitions can be made with one's own hand, but without suitable tools it will be extremely difficult. Plasterboard material seems simple to make a decor element. As an example, consider the procedure for creating a stationary partition for dividing space into zones.
Markup. A drywall profile up to 5 cm wide is laid on the floor, and then it is surrounded by chalk. The workpiece is attached at a distance of one cm from the outlined line;
In the same way, marking under the racks is carried out;
A profile about 2 m high is fixed to the wall by means of self-tapping screws;
Marking up temporary jumpers for further installation of shelves;
The frame of the proposed design is sewn (width up to 25 cm is recommended). To do this, whole sheets of drywall are carefully cut from each side. The remainder will then go to trim the ends;
The perforated corner is fixed by means of a stapler;
Finishing is carried out in two stages: reinforcing, then finishing.
This decor can be made by yourself.
Subsequently, the finished design of the partition can be decorated at your discretion.
Unusual luminous screen of branches and a garland
Conclusion
The use of designer products in the interior is often due to the need for functional zoning of the space: whether it is a stationary partition for zoning a single room or the installation of sliding interior partitions. However, they can also be used as purely decorative elements, with the aim of aesthetic decoration of the space.
When there is a need for redevelopment of a single room or apartment as a whole, decorative partitions can come to the rescue. Since they not only perform an aesthetic function in the interior, but also serve as an excellent tool for zoning. The initial layout could be extremely unsuccessful: small rooms caused claustrophobia, and large ones were too uncomfortable, too spacious. In such cases, partitions allow you to rationally use the usable area and correctly delimit the space. And the design execution of these practical products guarantees the transformation of the interior beyond recognition. Sometimes this is the only right decision that the owner of the house can make in order to achieve comfort. Next, we consider the main characteristics and options for their application.
Content
The use of decorative products in a modern interior
The choice of suitable decorative elements directly depends on the room that needs to be decorated. Based on its parameters, functional tasks and general style, one or another type of decorative partitions should be selected. The shape of the products must also take into account the characteristics of a given space.
Among the advantages of using this decorative element are noted such as:
The disadvantages include poor sound insulation or the relatively high cost of some models. Depending on the layout, there are two main types of decorative partitions in the interior:
The use of partitions depending on the purpose of the rooms
Living room
The versatility of this room puts forward its requirements for the organization of space. Since not only a festive reception of guests is held here, but also often a family dinner. All family members gather to discuss each their own interests. Therefore, it is necessary to fully satisfy their potential needs. It is even possible to use several decorative partitions.
It is recommended that you read articles on the design of a modern interior, which may offer different options for zoning rooms. The arguments that are given there may affect the future layout. For example, you can divide the dining area and the place to relax with an elegant screen or a stylish glass partition. The use of specific materials should focus on common color scheme living room, a type of furniture.
Another option to place many different accessories, colors or books can be a decorative partition - a rack. The comfort that it can provide allows you to fill the modern interior of the room with real cosiness. A similar effect can be achieved when used as a partition - decorative, integrated aquarium. Since its sides will be open to both zones, he will be able to carry out the difficult task: to decorate each zone, while leaving them separate from each other.
Bedroom
Often, in small apartments have to combine bedroom with study. The lack of space has an acute effect on the general feeling, which leads to the impossibility of both rest and fruitful work.
The use of decorative partitions helps to solve this problem. A screen of various shapes allows you to provide privacy to each member of the couple.
Kitchen
The main function of the partition in this room is to delimit the space for cooking and eating. Partitions in the interior of the kitchen stylishly ennoble dining area, at the same time allowing to improve the practicality of the cooking area.
A wire screen on a wooden frame seems to be very convenient in operation.It is used to place kitchen accessories, the care of galvanized material is extremely simple. Such a decorative partition can have a variety of forms.
Children's room
It will require a division into three functional zones: for recreation, study, as well as a playground. Such zoning allows you to leave a mess in the place provided for this. Another space will be used for practical educational purposes. Often, for such an organization of the interior, a decorative box-shaped partition is used to additionally be able to fill it with something useful.
The main types of decorative partitions in the interior
Decorative partitions in the interior, designed for zoning the room, can radically modify the perception of space with minimal means. Moreover, achieving the desired effect does not imply the destruction of the wall or ceiling surfaces of the room.
Only partial dismantling of the floor covering is required. The parameters and shape of the designer product are chosen according to the taste of the owner, since there can be no significant restrictions. The partition for zoning the room can reach ceiling heights or not exceed the growth of the smallest member of the family. The situation is similar with width. As for the selection of material, we consider further the existing types.
Drywall
With the help of this material, you can realize almost any fantasy, since their installation or dismantling does not imply absolutely any difficulties. Drywall products are characterized by low weight, lightness, which determines the methods of their use. Finishing the surface of such a partition can be very different.
The demand for this type of decorative element is due to the fact that it allows you to reliably hide engineering communications and is fire resistant.
Brick
This traditional material is also very popular. Usually decorative brick It is used where stationary partitions cannot be dispensed with, since dismantling of this type is characterized by its obvious laboriousness. The design properties of the noble material are great for a variety of interior styles (country, provence, etc.).
Tree
Wooden partitions are perfectly combined with any style of the room, with the exception of frank hi-tech. Often are the main element of the decor, attracting all the attention of guests. A carved, perfectly polished natural wood product exquisitely decorates the interior.
The material for the frame of one or another structure can serve as boards (timber) and MDF. Finishing involves the processing of natural material with paint and varnish solutions. After this procedure, the wooden partition will be distinguished by its reliability and resistance to mechanical stress. Among the disadvantages of using the material are called fire hazard, as well as the inadmissibility of excessive moisture.
Glass
Glass products are designed to maximize the preservation of usable space, while leaving a feeling of openness. Frosted glass partitions quite clearly delineate the functional areas without weighting or reducing the interior visually.
The disadvantages of this type include the obvious need for regular cleaning of the glass plane, as well as the inability to hide engineering communications in the decorative element. However, the aesthetic side of the material compensates for this drawback.
Glass is used both for stationary partitions and as a sliding screen.The advantages of using this material include the absence of obstacles to the passage of light, resistance to changes in humidity and temperature, and durability.
the cloth
When a solid partition is not required, fabric partitions (curtains, drapes) are used for zoning rooms. Features of the material involve both swivel and sliding partitions. For this decorative element, installation of a special cornice with guides is required under the ceiling.
Using this design allows the canvas to easily slide and delimit the space of living rooms. In the bedroom, a fabric screen makes it possible to retire, and in the living room organize a home theater.
Rack
Convenience rack designs lies in the further arrangement on the open shelves of various accessories, whether it be books or lamps. Moreover, the shelves can be opened on several sides, for each functional area.
Metal forging
For this decorative element, a certain approach is required, since it will look under the condition of a particular style of room decoration.
You can name such interior design options as modern or art deco. Forged metal is used when necessary. place a fireplace in one of the sections of the room. Polished steel - when design is a high-tech style.
Making decorative items with your own hands
Partitions can be made with one's own hand, but without suitable tools it will be extremely difficult. Plasterboard material seems simple to make a decor element. As an example, consider the procedure for creating a stationary partition for dividing space into zones.
Subsequently, the finished design of the partition can be decorated at your discretion.
Conclusion
The use of designer products in the interior is often due to the need for functional zoning of the space: whether it is a stationary partition for zoning a single room or the installation of sliding interior partitions. However, they can also be used as purely decorative elements, with the aim of aesthetic decoration of the space.